Cleaning machines

InJet®

InJet®

The vertically installed Spray-In-Air system minimizes the shadowing effect commonly seen in horizontal cleaners and maximizes the efficiency of the cleaning process as the cleaning fluid is sprayed directly onto the cleaned component.

InJet® 388 CD

InJet® 388 CD

The InJet 388® cleaning solution represent unique vertical Spray-In-Air technology developed and manufactured by DCT. The vertically installed Spray-In-Air system minimizes the shadowing effect commonly seen in horizontal cleaners and maximizes the efficiency of the cleaning process as the cleaning fluid is sprayed directly onto the cleaned component.

Technical data sheet
InJet® 388 CRD

InJet® 388 CRD

All processes are fully automated and run in one process chamber. InJet® 388 CRD is primarily developed for removing solder pastes and SMT adhesives from stencils, PumpPrint, squeegee and misprint.The washing system can also be used for post-soldering plate washing or for a combination of plate washing and the above-mentioned washing processes. It is also possible to use the machine I for removing the cured conformal coating.

Technical data sheetYouTube video
InJet® 388 CRRD Combo

InJet® 388 CRRD Combo

The InJet® 388 CRRD “Combo” is primarily designed for precision plate cleaning after soldering. The washing system can also be used for high-quality removal of solder pastes and SMT adhesives from stencils, PumpPrint, squeegees and misprint, or the aforementioned washing applications, along with washing the boards after soldering. It is also possible to use the machine to remove the cured conformal coating.

Technical data sheet
InJet® 388 TWIN CRD Sausage dog

InJet® 388 TWIN CRD Sausage dog

InJet® 388 TWIN CRD is primarily developed for removing solder pastes and SMT adhesives from stencils, PumpPrint, squeegee and misprint. The washing system can also be used for post-soldering plate washing or for a combination of plate washing and the above-mentioned washing processes.All processes are fully automated and take place in 2 process chambers, where the washing takes place in the first inlet chamber, after which the washed part is automatically transported by the medium transfer space to the 2 process chamber for rinsing and drying. This chamber is also an outlet chamber. Both chambers can be used in parallel, which increases machine capacity and reduces cross-contamination compared to single-chamber equipment.

Technical data sheet
InJet® 388 TWIN CRRD Sausage dog

InJet® 388 TWIN CRRD Sausage dog

All processes are fully automated and run in 3 process chambers. Washing takes place in the first inlet chamber, after which the washed part is automatically transported to the central passage chamber where the first rinsing process takes place. The last third and outlet chambers are for the final rinse and drying process.Both chambers (inlet and outlet) can be used simultaneously, which increases machine capacity and reduces cross-contamination compared to single-chamber systems.InJet® 388 TWIN CRRD “Sausage Dog” is developed primarily for high-capacity and precise plate cleaning after soldering.The washing system can also be used for high-capacity removal of solder pastes and SMT adhesives from stencils, PumpPrint, squeegees and misprints.

Technical data sheet
InJet® 388 TRIPLE CRRD

InJet® 388 TRIPLE CRRD

InJet® 388 TRIPLE CRRD is developed primarily for high-capacity and precise plate cleaning after soldering. All processes are fully automated and run in 3 separate process chambers, where the washing takes place in the first inlet chamber, then the washed part is automatically transported to the central chamber where the first rinsing process takes place. The last third and outlet chambers are for the final rinse and drying process. All 3 chambers can be used in parallel, which increases machine capacity and reduces cross-contamination compared to single-chamber systems.

Technical data sheet
InJet® 388 DOUBLE TRIPLE CRRD

InJet® 388 DOUBLE TRIPLE CRRD

All processes are fully automated and run in 3 process chambers. Washing takes place in the first inlet chamber, after which the washed part is automatically transported to the central chamber where the first rinsing process takes place. The last third and outlet chambers are for the final rinse and drying process.All 3 chamber chambers (inlet and outlet) can be used simultaneously, which increases machine capacity and reduces cross-contamination compared to single-chamber equipment. The machine has two positions on the PCB frame (two slots), which means that at full capacity, 6 frames with PCB are simultaneously processed.Thus, the InJet® 388 DOUBLE TRIPLE CRRD delivers twice the washing capacity of the InJet® 388 TRIPLE CRRD and is, therefore, our most powerful vertical sprayer for post-solder plate cleaning, which has also been developed.The washing system can also be used for high-capacity removal of solder pastes and SMT adhesive from stencils, PumpPrint, squeegee and misprint.

Technical data sheet
InJet® 3179 CRD BigBoard

InJet® 3179 CRD BigBoard

InJet® 3179 CRD is designed to remove solder pastes and SMT adhesives from non-standard oversized stencils up to 1170 x 2160 x 2015 mm and 46.1 x 85 x 79.3 in, respectively. The machine can, of course, be used simultaneously for scraping, misprinting or pumpprinting. The size of the process chamber also provides the possibility of inserting and simultaneously washing 2 standard 29 ”x 29” templates.

Technical data sheet
InJet® 888 CRD 1F

InJet® 888 CRD 1F

The designation 1F indicates a 1-storey solution, primarily intended for washing larger parts. InJet® 888 CRD-1F is designed primarily for removing flux residues from solder frames or for maintenance cleaning of soldering equipment parts.

Technical data sheet
InJet® 888 CRD 2F

InJet® 888 CRD 2F

InJet® 888 CRD-2F is designed primarily for removing flux residues from solder frames or for maintenance cleaning of soldering equipment parts. The washing system can be used for washing boards after soldering or for a combination of board washing, misprinting and templates. The 2F designation refers to a 2-storey solution where smaller parts can be washed in two baskets simultaneously to maximize washing capacity. After easy removal of the central spray boom, large parts can be washed in one (lower) basket.

Technical data sheet
InJet® 888 CRRD 1F

InJet® 888 CRRD 1F

The InJet® 888 CRRD-1F is designed primarily to remove flux residues from solder boards. The designation 1F indicates a 1-storey solution, primarily intended for washing larger parts. It is possible to insert and wash a template or misprints at the same time.

Technical data sheet
InJet® 888 CRRD 2F

InJet® 888 CRRD 2F

The InJet® 888 CRRD-2F is designed primarily for removing flux residues from brazed boards. It is possible to insert and wash a template or misprints at the same time. The 2F designation refers to a 2-storey solution where smaller parts can be washed in two baskets simultaneously to maximize washing capacity. After easy removal of the central spray boom, large parts can be washed in one (lower) basket.

Technical data sheet
AirJet®

AirJet®

AirJet line has four different setups including smaller layout systems, fully automatic versions or systems for cleaning of extra-large production parts. All three chambers can be used simultaneously to maximize capacity.

AirJet® 486 CRD

AirJet® 486 CRD

All processes are automated and take place in 3 separate process chambers, which are also storage tanks.Washing takes place in the first inlet chamber, where the operator places the basket of parts. Then, the operator manually moves the washed basket to the secondary rinse chamber. The operator then moves the basket to the last drying chamber.All 3 chambers can be used at the same time, which increases the washing capacity of the machine and reduces cross-contamination compared to single-chamber systems.The AirJet® 486 CRD is designed for the maintenance washing of reflow ovens and waves soldering machines parts.

Technical data sheet
AirJet® 594 CRD

AirJet® 594 CRD

The AirJet® 594 CRD is equipped with a motorized manipulator for easy lowering the baskets, then pulling out the baskets and moving them between the process chambers.Thanks to this device, the operator is not forced to lift heavy parts, making the machine exceptionally ergonomic, safe and user-friendly. Washing takes place in the first inlet chamber, where the operator drops the parts basket using a manipulator. After washing, the operator moves the basket to the rinsing chamber by the manipulator and then to the last drying chamber.All 3 chambers can be used simultaneously, which increases the washing capacity of the machine and reduces cross-contamination compared to single-chamber systems.AirJet® 954 CRD is designed for maintenance washing of reflow ovens and waves soldering machines parts.

Technical data sheet
AirJet® 954 CRD Piano

AirJet® 954 CRD Piano

All processes are fully automated and take place in one process chamber, under which are placed 2 tank tubs, one with washing liquid and the other with rinsing liquid.The operator places the parts to be cleaned in the process chamber in the basket and the washing system automatically performs the washing, rinsing and drying process.The AirJet® 954 CRD “Piano” is designed for the maintenance washing of reflow ovens and wave soldering machines parts or for removing cured conformal coating from coating frames, coating machine parts or coating PCBs for repair and subsequent coating.

Technical data sheet
AirJet® 4127 CRD

AirJet® 4127 CRD

All processes are automated and take place in 3 separate process chambers, which are also storage tanks.Washing takes place in the first inlet chamber, where the operator places the basket of parts. Then, the operator manually moves the washed basket to the secondary rinse chamber. The operator then moves the basket to the last drying chamber.All 3 chambers can be used at the same time, which increases the washing capacity of the machine and reduces cross-contamination compared to single-chamber systems.AirJet® 4127 CRD is designed for maintenance washing of reflow ovens and wave soldering machines parts.

Technical data sheet
Sonix®

Sonix®

Sonix is a fully automatic system with two different setups including multi-chamber option. Itś designed to clean all types of conformal coating from coating frames, masks, pallets, parts of the coating line, or PCB.

Sonix® 355 CRRD

Sonix® 355 CRRD

All processes are automated and run in 4 separate process chambers, which are also storage tanks.Washing takes place in the first inlet chamber, where the operator places the basket of parts. Then the operator manually moves the basket with the washed parts to the secondary pre-rinse chamber. The operator then moves the basket to the final rinse chamber and finally to the last drying chamber.All 4 chambers can be used at the same time, which increases the washing capacity of the machine, reduces cross-contamination compared to single-chamber systems and optimizes rinsing with two rinsing chambers.Sonix® 355 CRRD is designed to remove the cured conformal coating from coating frames, coating machine parts of coated PCBs for repair and subsequent coating.

Technical data sheet
Sonix® 954 CRD Piano

Sonix® 954 CRD Piano

All processes are fully automated and take place in one process chamber, under which are placed 2 tank tubs, one with washing liquid and the other with rinsing liquid. The operator puts the parts to be washed in the process chamber into the basket, and the washing system automatically performs the washing, rinsing and drying process.Sonix® 954 CRD “Piano” is designed to remove the cured conformal coating from coating frames, coating machine parts or coating PCBs for repair and subsequent coating. In certain cases, Sonix® 954 CRD “Piano” may also be recommended for PCB washing or for degreasing metal parts.

Technical data sheet
Accessories

Accessories

External filtration

External filtration

Large-capacity external filtration, made completely of stainless steel, is another of a number of unique solutions for filteringof rinse water from the production of DCT Czech s.r.o.The system uses the sandwich filtration continuously connected in three filter tanks.These are interconnected by stainless steel distribution pipes and placed on a separate structure with rollers, which ensurestrouble-free handling and the possibility of connecting to any type of washer from the production of DCT Czech. Easy maintenanceand service are commonplace without any disassembly.

Technical data sheet
2 PR Filtration

2 PR Filtration

This 2PR FILTRATION (Second Phase Rinsing Filtration) is a unique filtration system of rinse water developed in DCT Czech s.r.o.This system operates continuously in 2 phases of rinsing.

Technical data sheet