Conformal coating cleaning

Conformal coating cleaning
A properly set up maintenance process for coating frame cleaning will ensure the subsequent quality, accuracy and repeatability of the coating process. Cleaning of already coated PCBs, even locally, will enable the PCBs to be repaired and thus save costs. 

Recommended products

Sonix® 355 CRRD

Sonix® 355 CRRD

All processes are automated and run in 4 separate process chambers, which are also storage tanks.Washing takes place in the first inlet chamber, where the operator places the basket of parts. Then the operator manually moves the basket with the washed parts to the secondary pre-rinse chamber. The operator then moves the basket to the final rinse chamber and finally to the last drying chamber....

Technical data sheet
Sonix® 954 CRD Piano

Sonix® 954 CRD Piano

All processes are fully automated and take place in one process chamber, under which are placed 2 tank tubs, one with washing liquid and the other with rinsing liquid. The operator puts the parts to be washed in the process chamber into the basket, and the washing system automatically performs the washing, rinsing and drying process.Sonix® 954 CRD “Piano” is designed to remove the cured...

Technical data sheet
AirJet® 954 CRD Piano

AirJet® 954 CRD Piano

All processes are fully automated and take place in one process chamber, under which are placed 2 tank tubs, one with washing liquid and the other with rinsing liquid.The operator places the parts to be cleaned in the process chamber in the basket and the washing system automatically performs the washing, rinsing and drying process.The AirJet® 954 CRD “Piano” is designed for the...

Technical data sheet
InJet® 888 CRD 2F

InJet® 888 CRD 2F

InJet® 888 CRD-2F is designed primarily for removing flux residues from solder frames or for maintenance cleaning of soldering equipment parts. The washing system can be used for washing boards after soldering or for a combination of board washing, misprinting and templates. The 2F designation refers to a 2-storey solution where smaller parts can be washed in two baskets simultaneously to...

Technical data sheet
Proton® 275

Proton® 275

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Used for epoxide, polyurethane and acrylic coatings.Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the ultrasound

Technical data sheet
Proton® 532

Proton® 532

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Determined for styrene, acrylic, urethane coating.Ready-mix, intended for direct use.Intended for use in all types of cleaning machines, mainly for the ultrasound.

Technical data sheet
Proton® 703

Proton® 703

Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts.Intended specifically for dissolving of silicone coatings, also effective for most types of acrylic coatings.High compatibility with most aluminium alloys of coating frames. Ready-mix, intended for direct use.Intended for use in all types...

Technical data sheet
DI water

DI water

DCT Deionized water intended for dilution of concentrates of cleaning fluids and as a rinsing medium.

Technical data sheet
Traceability ONLINE

Traceability ONLINE

Highest level of DCT traceability option fulfilling Industry 4.0 requirements, using the online connection of cleaning machine to customer‘s network thru KepServer software. The output is not file but access to OPC client with online cleaning process data. Customer can use this data for all his own other traceability operations.

Technical data sheet
Traceability OFFLINE

Traceability OFFLINE

A basic version of traceability when general process data like set times, temperatures, conductivity levels, conductivity and cycle number are stored to CSV file in cleaning machine touch screen SD card.PLC is ready for connection of Barcode Reader. Customer can choose standard DCT barcode reader (P/N 10119A) or use own barcode reader when DCT need to setup its setting (P/N 10119C).

Technical data sheet