DECOTRON® - water-based

Reflow Cleaner 94

Reflow Cleaner 94

A water-based cleaning fluid designed for manual cleaning of soldering devices. Ready-mix intended for direct use. Designed for cleaning of most types of flux residues. Developed for areas with common contamination levels, minimum smell, high compatibility with aluminium-based alloys.

Technical data sheet

Reflow Cleaner 88

Reflow Cleaner 88

A water-based cleaning fluid designed for manual cleaning of soldering devices. Ready-mix intended for direct use. Designed for cleaning of most types of solder paste and flux residues. Developed for areas with high contamination levels. The increased smell, lower compatibility with aluminium-based alloys.

Technical data sheet

Decotron® 281

Decotron® 281

Water-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees. Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.

Technical data sheet

Decotron® 239

Decotron® 239

Water-based cleaning fluid determined to remove residues of a solder paste and uncured epoxy-based SMT adhesives from printing stencils, PCBs misprints and squeegees. Effective cleaning of process residues (dust, grease) from aluminium parts and plastics with good evaporation properties after cleaning.

Technical data sheet

Decotron® CP381

Decotron® CP381

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after the soldering process. Ready-mix, intended for direct use. Intended for use in all types of DCT cleaning machines, mainly in high-pressure spray-in-air cleaning machines.

Technical data sheet

Decotron® 23

Decotron® 23

Water-based cleaning fluid determined for cleaning of stencils.Specially designed for wet cleaning process in screen printing. Ready-mix, intended for direct use. Effective for all types of solder pastes. Intended for use in all types of printing machines.

Technical data sheet

Decotron® 250

Decotron® 250

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.

Technical data sheet

Decotron® 250/25

Decotron® 250/25

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees. Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without rinsing loop.

Technical data sheet

Decotron® M50

Decotron® M50

A water-based cleaning fluid designed for manual cleaning of soldering devices. Ready-mix intended for direct use. Designed for cleaning of most types of flux residues. Developed for areas with common contamination levels, minimum smell.

Technical data sheet

Decotron® T300SA

Decotron® T300SA

Water-based cleaning fluid determined for maintenance cleaning of flux residues from soldering frames, pallets and masks and parts of reflow ovens and wave soldering machines. Extra strong ready-mix intended for heavily polluted parts. Additive against oxidation of aluminium.

Technical data sheet

Decotron® 351S

Decotron® 351S

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after the soldering process. Intended for use in all types of DCT cleaning machines, mainly in the ultrasonic and high-pressure spray-in-air cleaning machines.

Technical data sheet

Decotron® 355S

Decotron® 355S

Water-based cleaning fluid determined to clean flux residues from PCBs after the soldering process. Intended for use in InJet types of DCT cleaning machines with high-pressure spray-in-air cleaning technology.

Technical data sheet

Decotron® ACW 115

Decotron® ACW 115

Water-based cleaning fluid determined to remove dust particles and grease from aluminium parts. Designed for use as a rinsing fluid for aluminium parts after cleaning with Proton® 703. Ready-mix, designed for direct use.

Technical data sheet

Decotron® 259

Decotron® 270

Decotron® 331S

Decotron® 333F

Decotron® C55S

Decotron® CP382

Decotron® CP384


Get In Touch