Manual cleaning

Manual cleaning
A common part of cleaning processes in companies is the manual cleaning of certain machine parts or PCBs.Ensuring proper PCB functionality is one of the basic requirements in the electrical engineering industry. PCBs are often repaired manually after which the repaired spot needs to be cleaned again. For this purpose, our company has prepared a manual cleaning spray named Flux Remover 4 which ensures trouble-free removal of flux residues, solder paste residues and other contaminants.Other products for manual cleaning of soldering furnaces and waves are Reflow Cleaner 88 and Reflow Cleaner 94. These cleaning sprays ensure high-quality maintenance of those machine parts that cannot be dismantled and cleaned directly in cleaning systems.

Recommended products

Flux Remover 4

Flux Remover 4

Manual PCB cleaning after the reflow process.Special bristles - with optimal hardness, developed, especially for PCB cleaning. Thanks to the unique material of the fibres, they do not fray and their working life is extended.High evaporation - the remaining fluids will quickly evaporate and the board stays completely dry.

Technical data sheet
Stencil Cleaner 11

Stencil Cleaner 11

An alcohol-based cleaning fluid designed for manual pre-cleaning and cleaning of print stencils and squeegees.Ready-mix designed for direct use.Designed for cleaning of most soldering paste and SMT adhesive types.Recommended for stencil pre-cleaning before machine cleaning or as a manual solutionfor stencil cleaning.

Technical data sheet
Reflow Cleaner 88

Reflow Cleaner 88

A water-based cleaning fluid designed for soldering device manual cleaning - for high contamination.Ready-mix designed for direct use. Designed for cleaning of most soldering paste and flux types. Developed for areas with strong contamination levels, increased smell, and lower compatibility with aluminium-based alloys.

Technical data sheet
Reflow Cleaner 94

Reflow Cleaner 94

A water-based cleaning fluid designed for soldering device manual cleaning for low contamination. Ready-mix designed for direct use. Designed for cleaning most flux types. Developed for areas with common contamination levels, minimum smell, high compatibility with aluminium-based alloys.

Technical data sheet
Decotron® M50

Decotron® M50

A water-based cleaning fluid designed for soldering device. It´s for manual cleaning of low contamination.Ready-mix designed for direct use. Designed for cleaning most flux types. Developed for areas with common contamination levels, minimum smell.

Technical data sheet