Stencil + misprint + squeegee

Stencil + misprint + squeegee
Perfectly clean stencils and squeegees are one of the basic prerequisites for the overall quality of SMT production. Especially with nowadays miniaturization of components. If the paste is overprinted and properly adjusted cleaning process saves considerable costs. 

Recommended products

InJet® 388 CD

InJet® 388 CD

The InJet 388® cleaning solution represent unique vertical Spray-In-Air technology developed and manufactured by DCT. The vertically installed Spray-In-Air system minimizes the shadowing effect commonly seen in horizontal cleaners and maximizes the efficiency of the cleaning process as the cleaning fluid is sprayed directly onto the cleaned component.

Technical data sheet
InJet® 388 CRD

InJet® 388 CRD

All processes are fully automated and run in one process chamber. InJet® 388 CRD is primarily developed for removing solder pastes and SMT adhesives from stencils, PumpPrint, squeegee and misprint.The washing system can also be used for post-soldering plate washing or for a combination of plate washing and the above-mentioned washing processes. It is also possible to use the machine I for...

Technical data sheetYouTube video
InJet® 388 CRRD Combo

InJet® 388 CRRD Combo

The InJet® 388 CRRD “Combo” is primarily designed for precision plate cleaning after soldering. The washing system can also be used for high-quality removal of solder pastes and SMT adhesives from stencils, PumpPrint, squeegees and misprint, or the aforementioned washing applications, along with washing the boards after soldering. It is also possible to use the machine to remove the cured...

Technical data sheet
InJet® 388 TWIN CRD Sausage dog

InJet® 388 TWIN CRD Sausage dog

InJet® 388 TWIN CRD is primarily developed for removing solder pastes and SMT adhesives from stencils, PumpPrint, squeegee and misprint. The washing system can also be used for post-soldering plate washing or for a combination of plate washing and the above-mentioned washing processes.All processes are fully automated and take place in 2 process chambers, where the washing takes place in the...

Technical data sheet
InJet® 388 TWIN CRRD Sausage dog

InJet® 388 TWIN CRRD Sausage dog

All processes are fully automated and run in 3 process chambers. Washing takes place in the first inlet chamber, after which the washed part is automatically transported to the central passage chamber where the first rinsing process takes place. The last third and outlet chambers are for the final rinse and drying process.Both chambers (inlet and outlet) can be used simultaneously, which...

Technical data sheet
InJet® 388 Triple CRRD

InJet® 388 Triple CRRD

InJet® 388 TRIPLE CRRD is developed primarily for high-capacity and precise plate cleaning after soldering. All processes are fully automated and run in 3 separate process chambers, where the washing takes place in the first inlet chamber, then the washed part is automatically transported to the central chamber where the first rinsing process takes place. The last third and outlet chambers are...

Technical data sheet
InJet® 3179 CRD BigBoard

InJet® 3179 CRD BigBoard

InJet® 3179 CRD is designed to remove solder pastes and SMT adhesives from non-standard oversized stencils up to 1170 x 2160 x 2015 mm and 46.1 x 85 x 79.3 in, respectively. The machine can, of course, be used simultaneously for scraping, misprinting or pumpprinting. The size of the process chamber also provides the possibility of inserting and simultaneously washing 2 standard 29 ”x 29”...

Technical data sheet
InJet® 388 Double Triple CRRD

InJet® 388 Double Triple CRRD

All processes are fully automated and run in 3 process chambers. Washing takes place in the first inlet chamber, after which the washed part is automatically transported to the central chamber where the first rinsing process takes place. The last third and outlet chambers are for the final rinse and drying process.All 3 chamber chambers (inlet and outlet) can be used simultaneously, which...

Technical data sheet
Decotron® 23

Decotron® 23

Water-based cleaning fluid determined for cleaning of stencils.Specially designed for wet cleaning process in screen printing. Ready-mix, intended for direct use. Effective for all types of solder pastes. Intended for use in all types of printing machines.

Technical data sheet
Decotron® 250

Decotron® 250

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without...

Technical data sheet
Decotron® 250/25

Decotron® 250/25

Water-based cleaning fluid determined to remove residues of a solder paste from printing stencils, PCBs misprints and squeegees. Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines. Suitable to use cleaning machines without...

Technical data sheet
Decotron® 281

Decotron® 281

Water-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Ready-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives. Intended for use in all types of cleaning machines, mainly in the high-pressure spray-in-air cleaning machines.

Technical data sheet
Decotron® CP381

Decotron® CP381

Water-based cleaning fluid determined to clean misprints and remove flux residues from PCBs after the soldering process.Ready-mix, intended for direct use.Intended for use in all types of DCT cleaning machines, mainly in high-pressure spray-in-air cleaning machines.

Technical data sheet
Proton® 21

Proton® 21

Alcohol-based cleaning fluid determined to remove residuesof a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegees.Specially designed for wet cleaning process in screen printingReady-mix, intended for direct use. Effective for all types of solder pastes and most types of SMT adhesives.Intended for use in all types of cleaning machines, mainly in the...

Technical data sheet
Proton® 29

Proton® 29

100% Alcohol-based cleaning fluid determined to remove residues of a solder paste and SMT adhesives from printing stencils, PCBs misprints and squeegeesSpecially designed for wet cleaning process in screen printing. Effective for all types of solder pastes andmost types of SMT adhesives. Ready-mix, intended for direct use.

Technical data sheet
DI water

DI water

DCT Deionized water intended for dilution of concentrates of cleaning fluids and as a rinsing medium.

Technical data sheet
Stencil Cleaner 11

Stencil Cleaner 11

An alcohol-based cleaning fluid designed for manual pre-cleaning and cleaning of print stencils and squeegees.Ready-mix designed for direct use.Designed for cleaning of most soldering paste and SMT adhesive types.Recommended for stencil pre-cleaning before machine cleaning or as a manual solutionfor stencil cleaning.

Technical data sheet
Traceability ONLINE

Traceability ONLINE

Highest level of DCT traceability option fulfilling Industry 4.0 requirements, using the online connection of cleaning machine to customer‘s network thru KepServer software. The output is not file but access to OPC client with online cleaning process data. Customer can use this data for all his own other traceability operations.

Technical data sheet
Traceability OFFLINE

Traceability OFFLINE

A basic version of traceability when general process data like set times, temperatures, conductivity levels, conductivity and cycle number are stored to CSV file in cleaning machine touch screen SD card.PLC is ready for connection of Barcode Reader. Customer can choose standard DCT barcode reader (P/N 10119A) or use own barcode reader when DCT need to setup its setting (P/N 10119C).

Technical data sheet